Why Coupling Grease?
Adequate lubrication is essential for satisfactory gear coupling operation. Gear Coupling Grease is exclusively developed for gear coupling applications to boost coupling daily life whilst dramatically reducing upkeep time. Its large viscosity base oil and tackifier combine to keep the grease in area and prevent separation and it’s in full compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and produced which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces normally located in couplings. Bearing or basic function greases often separate and get rid of effectiveness on account of substantial centrifugal forces over the various substances at higher rotational speeds. These large centrifugal forces encountered in couplings separate the base oil in the thickeners. Heavy thickeners, which have no lubrication attributes, accumulate during the gear tooth mesh region leading to premature coupling failure. Gear Coupling Grease is built to extremely resistant to centrifugal separation of the oil and thickener, which lets the lubricant to be utilised to get a relatively long period of time.
One of the secrets and techniques to your good results of Gear Coupling Grease could be the variable consistency throughout the doing work cycle of the application. The consistency of our gear coupling grease improvements with the working situations. Working from the lubricant below actual services disorders causes the grease to turn out to be semi-fluid, functionally solash lubricating the wear surfaces in the coupling. Since the grease cools, it returns to your authentic consistency, thereby preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and five lb. cans.
Characteristics
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
High load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in area underneath high speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated which has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.