DC MOTOR PUMP GROUP 1
Standard Description
Consisting of a heavy duty DC motor and the CB1S gear pump, this pump motor group is an great hydraulic electrical power unit for mobile hydraulic equipments, this kind of as automobile carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump includes a 4.5″ DC motor in addition to a CBSR gear pump which has a common electrical power up/gravity down circuit which has a relief valve, a verify valve as well as a solenoid release valve.
Exclusive Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic components concerned before mounting the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~68 cst, which should really also be clean and totally free of impurities. N46 hydraulic oil is proposed.
4. The electrical power unit ought to be mounted horizontally.
5. The relief valve strain is preset about 25% higher compared to the operating stress.
six. Flow management valve for lowing speed adjustment is accessible unpon request.